Last Updated on December 1, 2022
Wall heaters are attached to the wall with either screws or nails. Most of the time, the screws and nails would be located at the top of the unit, while the screws would be located towards the bottom. The process of removing a heater can be tricky, but it’s not impossible. Here we will discuss how to remove wall heater with the correct tools, and with a bit of know-how, without damaging the wall.
How to Remove Wall Heater: DIY 5 Steps
When you are ready to remove your wall heater, the following points should be kept in mind. To begin with, make sure that you have the correct tools.
Turn Off the Power to the Wall Heater
Most wall heaters are powered by electricity, so the first step in removing one is to find the fuse box or circuit breaker and flip the switch that corresponds to the heater. Having turned off the power, you can remove the screws that maintain the heater in place.
With the screws and wiring removed, the heater should easily come away from the wall. Putty knife, or wrap it in duct tape and pull it off, can be used to remove adhesive residue.
Remove the Screws Holding the Wall Heater in Place
To remove the wall heater, you need to take out the screws. The most common place to find these is at the top. With a screwdriver, simply unscrew them and set them aside. Remove any nails holding it in place with a hammer.
Carefully Pull the Wall Heater Away From the Wall
As soon as you remove the screws and nails, you can take the wall heater off the wall. It’s not worth damaging the heater or the wall. If there’s adhesive remnants, remove them with a putty knife or by wrapping them in duct tape and pulling them off.
Use a Pry Bar to Remove the Wall Heater
Using a pry bar might help loosen the wall heater if it’s hard to remove. Insert the pry bar between the wall and the heater, and then gently lever it away from the wall. Be careful not to damage the wall or the heater as you do so.
Duct Tape the Wall Heater and Remove it
When all else fails, you may want to use duct tape to wrap the heater and then remove it. This should loosen the adhesive enough to allow you to remove the heater without damaging the wall.
With these tips, you should be able to take the wall heater out. Just be sure to take your time and work carefully, and you’ll be finished in no time.
Safety Precautions When Removing Wall Heaters
Be sure to read the instructions and follow all safety precautions before starting any work on a wall heater. The following are a few things to keep in mind:
- Always wear gloves when working with a wall heater.
- Make sure you turn the heater off before starting work.
- Use caution when removing the heater from the wall, as it may be sharp or hot.
- If you are using a drill, make sure you wear ear protection.
- Make sure not to damage the heater or the wall with a pry bar.
- When removing the adhesive from the wall, ensure that the paint or wallpaper is not damaged.
Why It is Necessary to Remove the Wall Heater?
If your wall heater is not working properly, it may be time to remove and replace it. If you are renovating your home or simply changing the look of your room, you may want to remove the old wall heater and install a new one. Whatever the reason, removing a wall heater is not as difficult as it may seem.
Frequently Asked Question
How to Repair an Electric Wall Heater?
There are a few things you can do yourself to fix an electric wall heater. First, check the heating element to see if it is still intact. If it is damaged, you will need to replace it.
Next, you should check the thermostat to ensure that it is working properly. If not, you can try calibrating it or replacing it. Finally, check the wiring to make sure there are no loose connections. If you find any damage, you will need to call an electrician.
How to Remove Wall Heater Cover?
To remove an electric wall heater cover, unscrew the crews that hold it in place. Once the screws are removed, the cover should come right off. If it’s stuck, you can try gently tapping it with a hammer or using a putty knife to pry it loose.
How to Restart a Gas Furnace?
Most gas furnaces have a pilot light that ignites the burner inside the unit. If this pilot light goes out, you’ll need to know how to restart it. The process for relighting a pilot light varies depending on the type of furnace you have. If you have an older furnace with a wall heater, you’ll need to open the access panel and locate the pilot light.
Once you’ve found it, hold a lighter next to the pilot opening and push the reset button. The flame should be igniting within a few seconds. If it doesn’t, repeat the process. On newer furnaces, the process is typically automated. Simply push the reset button and wait for the igniter to click. The burner should ignite within 30 seconds.
How Long Does a Wall Heater Last?
The right care and maintenance can make your wall heater last for a long time. The most important thing to do is to keep the heating element clean and free of dust and debris. Once a month, vacuum the heating element with the brush attachment to remove any build-up.
Furthermore, it is important to keep the area around the wall heater free from any flammable materials. Inspect the cords and plugs regularly for signs of wear, and replace them if necessary.
How Should I Proceed if There is any Adhesive Residue Left Behind?
It is possible to remove adhesive in a variety of ways, depending on the type. In such cases, you can simply wipe away the residue with a damp cloth. If the residue is oil-based, you may need to use a stronger solvent such as mineral spirits or paint thinner.
In either case, test the cleaner first on a small area to make sure it won’t damage your surface. Once the residue is removed, you can proceed with painting or wallpapering as usual.
Conclusion
Wall heaters are a great way to keep your home warm and save on energy costs. Make sure you read the instructions carefully before you start working on the heater. Make sure any flammable materials are kept away from the wall heater. With proper care and maintenance, your wall heater should last for many years.
Recommended Article To Read:
- Is there a reason why cats scratch walls?
- Why you should take shelves off the wall?
- What is the best method for removing wood glue from a wall?