Every Inside

Get All Your Home Improvement Solutions with Our Handy Tips

Best Way to Hang Things on a Fiberglass Door [10 Factors]

Best Way To Hang Things On a Fiberglass Door

Last Updated on November 12, 2022

There are a few reasons why it can be difficult to mount anything on a fiberglass door. Starting with as they are a very smooth material, which means there is nothing for nails or screws to grip onto. It’s also very hard and hollow inside.

You might want to hang items from fiberglass doors for several reasons. One of the best features of fiberglass doors is that they do not dent like other door materials. They are less likely to absorb moisture, making them less likely to warp or crack over time.

There are a few tips that can make the process easier to hang things on a fiberglass door. Continue reading for a detailed guide. We demonstrate wreaths as a guiding example.

Best Way to Hang Things on a Fiberglass Door: 

Best Way To Hang Things On a Fiberglass Door

10 Things To Consider When Hanging Stuff On Fiberglass Doors

Hanging items on a fiberglass door can be tricky. The door is smooth, so there’s nothing to grab onto, and the material is slippery, so tape and magnets don’t always hold. 

But with a little creativity and careful planning, you can successfully hang almost anything from a fiberglass door. Here are 10 things to take into account when hanging objects on fiberglass doors:

1. Weight of the Object:

When deciding if an object is too heavy to hang across a fiberglass door, it is vital to consider the weight of the thing. A general rule is that the object should not be more than 20 percent of the total weight of the door.

If the door weighs 100 pounds, the object should not weigh more than 20 pounds. It is important to evenly distribute the object’s weight so that it does not cause the door to warp or bend.

2. Use Appropriate Hardware:

The reason to use appropriate hardware is that the wrong hardware can damage the door or cause it to break. If you use screws that are too long, they can pierce through the door and into the wall behind it.

Nails that are too short may not be able to hold the weight of what you are hanging and could cause the item to fall and break.

Use the correct type of hardware, such as screws or nails, on fiberglass doors to avoid damage and ensure that your items are securely in place.

Pilot holes should be drilled into the door before any nails or screws are inserted, and these holes should be slightly smaller than the hardware itself.

Pilot holes will help to keep the hardware from pulling out over time. Use wall anchors if you are hanging anything heavy on the door. These will provide extra support and distribute the weight more evenly.

3. Secure the Object Before Hanging

This is especially important if the object is heavy, as you don’t want it to fall and damage the door as this will prevent the object from falling and causing damage. 

Once you have ensured that the thing is secure, you can proceed to hang it on the door. When doing so, use sturdy hooks or nails to stay in place.

There are a few different ways to secure. You can use double-sided tape, putty, command strips, or nails. Make sure that whatever you use will securely hold the object.

4. Mark the Placement of the Object

When you are ready to hang an item on the fiberglass door, it is essential to take a few moments to draw a line where the object will be placed. This will ensure that the object is evenly spaced and level when it is hung.

It also allows you to make any necessary adjustments before permanently attaching the object to the door. In addition, marking the positioning of items makes it easier to drill holes for any hardware that will be needed.

The best way to mark the object’s placement is to use painter’s tape. Place the painter’s tape on the door where you want the object to be hung. Once the painters’ tape is in place, use a pen or pencil to trace around the object.

This will give you a template to follow when hanging the object. When tracing around the object, be sure to leave enough room for the hardware that will be used to hang the object. Once you have marked the object’s placement, remove the painters’ tape and set it aside.

5. Hang the Object from the Top

This will help to distribute the weight evenly and prevent the door from becoming unbalanced. Know why you need to hang objects from the peak. If it’s for aesthetic purposes, then ensure it’s at an appropriate height.

If it’s for practical purposes, such as a coat rack or towel hook, then make sure that the object is hung at a comfortable height that won’t impede your movements.

6. Use Wall-Mounted Hooks or Brackets

Hooks and brackets provide a sturdy way to hang things like coats, umbrellas, or towels. Just make sure to use screws that are long enough to go between the wall studs for added support.

You’ll need to drill holes in the door to install the hooks or brackets.

7. Use Command Strips or Adhesive Hooks

Use Command Strips or Adhesive Hooks

It is essential to use the proper type of adhesive to avoid damage. Command Strips and Adhesive Hooks are designed for use on fiberglass doors and will not cause harm. They will ensure your decorations stay in place and break.

When hanging light ornaments, use extra strips or hooks for added support. Clean the door’s surface first, then apply the strips or hooks according to the package directions. Simply peel off the backing and press and stick them firmly onto the door.

8. Use Magnetic Hooks

Magnetic hooks are one the best solutions because the door’s smooth surface means that traditional clips won’t grip well. These hooks use potent magnets to grab the door securely and won’t leave any marks or damage the door.

Plus, they’re super easy to remove and reposition as needed. Remember that the hooks may not be strong enough to support heavy items.

9. Use a Door Hanger

Using door hangers is recommended as they are designed to grip the door without leaving any marks or scratches, and they come in a variety of sizes and styles to accommodate different types of objects.

Door hangers are great for coats, hats, towels, and other lightweight items. Choose a hanger that is rated for the weight of the object you’ll be hanging. To hang a heavy object on your fiberglass door, make sure to use a heavy-duty door hanger.

10. Use Shelf Brackets

Shelf brackets are the way to go as they evenly distribute the weight of whatever you’re hanging on the door. They make it easy to change things up if you want to rearrange your display.

Also very easy to install and does not require any special tools or skills. To use shelf brackets, simply attach them to the wall at the desired height and then place the object on top.

Drilling into a fiberglass door

Drilling into a fiberglass door

Fiberglass is a composite material that is designed to be strong and lightweight. Unlike wood, it is not easy to drill through. If you try to drill a hole in a fiberglass door without the proper tools and techniques, you will likely damage the door beyond repair.

The following tips will help you successfully drill into a door made of fiberglass without causing damage to it. First, make sure that you are using a sharp Drill bit. A dull bit will cause the fibers to tear and fray, making it more difficult to get a clean hole.

Use a slow speed when drilling. This will help to prevent the bit from overheating and melting the fibers. Finally, apply firm pressure when drilling. This will keep the bit from slipping and damaging the door surface.

Tips for hanging pictures, shelves, and other decorations on a fiberglass door

Hanging pictures, posters, or other items on fiberglass doors is possible with special hangers. Several types of hangers available can accommodate different weights and sizes of objects.

Some hangers allow for easy removal and repositioning of objects, while others are more permanent. Special hooks are also available that can hang heavier objects on a fiberglass door without damaging the door surface.

Anything can be hung on a fiberglass door with some planning and proper hardware.


1. How To Decorate a Fiberglass Door For the Holidays?

How To Decorate a Fiberglass Door For the Holidays

One simple way to add decoration to a fiberglass door is to hang a wreath. You can either use a traditional evergreen wreath or get creative with other materials like dried flowers or fruit. For an extra special touch, try hanging a personalized Family Name Sign above the door.

Another option is to string some lights around the door frame. This is an easy way to add some holiday sparkle without going overboard. You could also hang some garland or tinsel around the door. Just be sure not to block the peephole.

If you have kids, they will probably want to help decorate the door as well. They can make homemade decorations like paper snowflakes or cut out construction paper shapes and tape them to the glass.

2. Why Are Fiberglass Doors a Popular Choice For Homeowners Today?

Fiberglass doors are a popular option among homeowners today because they offer many benefits. Fiberglass doors are strong and durable, meaning they will last for many years. They are also low maintenance and easy to clean, which is ideal for busy families.

They are a great insulator, helping to keep your home warm in the winter and cool in the summer. And because fiberglass doors are available in various styles and colors, you can find a fiberglass door to suit any home.

3. How do I Remove Adhesive-Backed Hooks from a Fiberglass Door?

Adhesive-backed hooks are a popular way to hang things on doors, but they can be difficult to remove without damaging the door. Fiberglass doors are particularly susceptible to damage from adhesive hooks, as the hooks can tear the finish and leave behind unsightly marks.

The best way to get rid of adhesive-backed hooks mounted on fiberglass doors is to use a putty knife or other flat object to gently pry the hook away from the door. Start at one corner of the hook and work your way around until the entire hook has been removed.

If any adhesive residue is left behind, it can be removed with a mild solvent such as rubbing alcohol. With a little patience, you can easily take off adhesive-backed hooks from fiberglass doors without causing any damage.

4. How Do I Prevent My Adhesive-Backed Hooks from Falling Off My Fiberglass Door?

This can be prevented by taking a few steps. First, make sure that the surface of the door is clean. This will give the adhesive a better chance to adhere to the door. Apply the adhesive to both the back of the hook and the door itself.

Press the two surfaces together firmly and hold for a few seconds. Avoid hanging heavy objects from the hooks; they are more likely to fall off if they are carrying too much weight. By following these simple tips, you can ensure that your adhesive-backed hooks will stay in place on your fiberglass door.

5. What Is the Best Way To Hang a Heavy Mirror On a Fiberglass Door?

There are a few considerations when mounting a massive mirror to a fiberglass door. First, the weight of the mirror will need to be supported by the hardware. 

Second, the installation will need to be done carefully to avoid damaging the door.

Third, the type of adhesive used will need to be appropriate for both the door and the mirror. With these factors in mind, the best method of hanging a heavy mirror is to use two brackets and an adhesive designed for both glass and plastic.

The brackets should be installed on either side of the door, and the adhesive should be applied to the back of the mirror. This method will provide both support and stability, and it will minimize the risk of damage to the door.


Things can be hung on fiberglass doors with the right tips and materials such as adhesive, and hardware. Follow these simple steps to hang holiday decorations, adhesive-backed hooks, or a heavy mirror without causing any damage.

To add some sparkle to your home, kids can help make their own decorations. There are many advantages to fiberglass doors, including their strength and durability, making them a popular choice among homeowners.

With a little preparation and care, you can easily decorate your fiberglass door during the holiday season. We hope the article on “best way to hang things on a fiberglass door” was useful to you, dear tool owners. We appreciate your patience in reading this.

Topics of Discussion:

Best Way to Hang Things on a Fiberglass Door [10 Factors]

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top