Every Inside

Get All Your Home Improvement Solutions with Our Handy Tips

How to Hang a Curtain On a Fiberglass Door : DIY 8 Steps

How to Hang a Curtain On a Fiberglass Door

Last Updated on November 12, 2022

Curtains can add a touch of luxury to any room, but they serve an important purpose as well. In addition to providing privacy and blocking out light, curtains can also help to reduce noise levels.

This is especially beneficial in rooms that are located near busy streets or with loud appliances. Fiberglass doors are particularly effective at blocking out noise, making them an ideal choice for bedrooms and home offices.

Hanging a curtain on a fiberglass door can be difficult due to the slippery surface. Luckily, there are a few simple tricks that make hanging a curtain on a fiberglass door easy. By hanging a curtain on a fiberglass door, you can create a serene oasis that is free from outside distractions.

List of Required Materials:

A fiberglass door curtain can be hung with the following tools: 

  1. A measuring tape 
  2. A level 
  3. A drill
  4. Drill bits
  5. Mounting screws
  6. Washers
  7. Wall anchors.

How to Hang a Curtain on a Fiberglass Door : Detailed Steps:

How to Hang a Curtain On a Fiberglass Door  Detailed Steps

1. Measure the Width of Your Door: Measuring your door’s width is an important step in order to hang a curtain on a fiberglass door. You will need measuring tape and a pencil. First, measure the width of the door at the top, middle, and bottom. 

Make a mark with the pencil at each measurement. Then, measure the distance between each mark and find the average width. This is the width you will use when shopping for curtains. 

Keep in mind that you will also need to account for the hardware (such as hooks or a rod) that will be used to hang the curtains. Add a few inches to your measurement to ensure that your curtains will fit properly.

2. Purchase a Curtain Rod that is Slightly Wider than Your Door: When shopping for a curtain rod, it is important to take door width into account. A rule of thumb is to select a rod that is 1-2 inches wider than the door itself. 

This will ensure that the curtains will hang evenly on either side when they are closed. 

3. Find Two Small Anchors and Screws: It is fairly simple to hang a curtain on a fiberglass door, but it is important to remember a few things. First, you will need to collect two small screws and anchors. These can be found at most hardware stores. 

Your curtain height and door width should also be measured. Once you have these measurements, measure and mark the appropriate spots on the door for the anchors. 

4. Drill a Hole: Although they are more durable than wood, fiberglass door frames can be more difficult to work with. The best way to accomplish this is to drill a hole in each upper corner of your doorframe. Make sure to avoid fiberglass when drilling, as this can damage the door.

5. Anchor Insertion: Insert an anchor into each hole and screw it in until it’s tight. Thus, you can use screws or nails to secure the curtain rod in place.

6. Cut the Curtain: It is important to cut the curtain to the desired length, plus an extra 4-6 inches for hemming when hanging a curtain on a fiberglass door. The extra length is necessary in order to create a hem that will properly adhere to the door. 

Fiberglass doors are smooth and may not provide enough friction to keep the curtain in place without a hem. In addition, the extra length helps to create a fuller look for the curtain. 

When cutting the fabric, be sure to use sharp scissors and follow the grain of the fabric. This will help to prevent fraying and maintain an even drape.

7. Sew a Channel Along the Top of the Curtain: The weight of the fabric is one of the things to consider when hanging curtains on fiberglass doors. If you’re using a heavy material, you might want to make a channel for the curtain top.

This will help distribute the weight more evenly and prevent the fabric from pulling away from the door. 

8. Hang the Rod and Insert Curtains: All you need to do is hang the curtain rod on the door and insert the curtains. The weight of the fabric will hold the rod in place, and you won’t have to worry about collapse.

9. Enjoy your new window treatment.

Additional Tips:

  1. You want to make sure that the area where you’re going to hang the curtain is level. This will help ensure that the curtain hangs evenly and doesn’t get caught on anything. In order to achieve this, find the distance between the door top and the rod’s top.
  2. It is important to center the curtain rod. To do this, simply take measurements on both sides of the rod from its end to the door’s edge. Centered rods will have the same measurement on both ends.
  3. Select a drill bit that is small enough to fit your mounting screws. Just below the point where the drill bit will contact the door surface, wrap the drill bit with tape. As a result, it is possible to prevent the cracking of fiberglass doors.
  4. Using command adhesive pads, you can attach rod brackets to a fiberglass door to hang a curtain. This can be used to quickly and easily hang curtains without damaging the door. The pads will hold the brackets in place and the curtains can be easily hung from the brackets. 
  5. Command hooks are a type of wall hook that uses adhesive strips instead of nails or screws. They are popular because they are easy to install and easily removed from the wall. A command hook can also hold a curtain rod, making it ideal for hanging curtains on fiberglass doors.

Relevant Article To Read: Is the Spice Rack compatible with any door?


Can I Put a Nail in a Fiberglass Door to Hang a Curtain?

Can I Put a Nail in a Fiberglass Door to Hang a Curtain?

If you have a fiberglass door, you’ll need to take special care not to damage the door when installing the curtain rod. The best way to install a curtain rod on a fiberglass door is with screw-in wall anchors and screws. You can certainly nail your door, but it can be risky.

How Can I Hang Curtains without Drilling Holes?

If you want a holeless option, you can use adhesive hooks. These hooks are designed to stick to surfaces without the need for nails or screws, and they can support a fair amount of weight. 

Can Command Strips be Used on Fiberglass Doors to Hang Curtains?

You can use command strips to hang curtains on a fiberglass door, but there are a few things to keep in mind. First, the door must be smooth and clean for the strips to adhere properly. If there are any bumps or imperfections, the strips may not stick as well. 

Second, the weight of the curtains will play a role in how well the strips hold. Heavier curtains will put more strain on the adhesive, so it’s important to choose a product that is rated for your specific type and weight of curtain. 

Finally, keep in mind that command strips are not meant for permanent installation. They can be removed with no damage to the door, but they may not adhere to the door the second time around. 

Can I Hang Blinds on a Fiberglass Door?

You can indeed hang blinds on a fiberglass door. There are a few different ways to do it, depending on the type of blinds you have and the look you’re going for. If you have a classic, 2-inch slat blinds, you can install them using magnetic brackets that attach to the doorframe. 

For a cleaner look, you can also get special brackets that mount on the inside of the door and hold the blinds in place that way. If you have faux wood or fabric blinds, they usually come with their own hardware for installation. 

In most cases, you’ll just need to screw some brackets into the doorframe and snap the blinds into place. 


Fiberglass doors are a popular choice for many homeowners because they are durable and low maintenance. When it comes to hanging curtains, these doors can present a bit of a challenge. If you follow the steps we described in this article, you will be able to hang a curtain on a fiberglass door easily.

The first is to choose a curtain rod that is the right size for the door. Second, be sure to measure the door before making any cuts to the fabric. Finally, use adhesive hooks or tape to attach the curtains to the door. This will provide a secure hold and help to prevent the curtains from slipping or falling. 

By following these simple steps, you can hang curtains on a fiberglass door with confidence and ease.

How to Hang a Curtain On a Fiberglass Door : DIY 8 Steps

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top